How To Repair Wii Controller

How to Ready a Nintendo Wii Controller

By Deb Katula

Updated September 22, 2022

i Jason Crowgey/Need Media

Wii remote problems make upwardly most of the troubleshooting questions for the gaming arrangement. Mutual complaints include an unresponsive remote, characters that disappear, characters that are off-center, jerky character move or a rumble that does not work. In that location are many simple steps that tin can be taken to resolve your Wii remote problems.

i Jason Crowgey/Demand Media

Alter the batteries in the Wii remote command. If you are using rechargeable batteries, make sure they are the correct type--nickel metallic hydride rechargeable batteries are recommended for apply in Wii systems.

i Jason Crowgey/Need Media

Clean the Wii remote arrow lens. Use a soft cloth to remove whatever sticky substances. Wii remote jackets, stickers or other objects should non cake the remote pointer lens, as it will cause characters to move erratically, disappear or remain off-eye.

i Jason Crowgey/Need Media

Operate the Wii remote between 3 to 8 feet away from the sensor. Otherwise, it will not perform properly.

Annotation that infra-cerise lights from candles, toys, appliances, fireplaces and even sunlight may effect how the Wii remote performs. Try to remove or reduce infra-red interference from these sources when possible.

Turn off or motility wireless devices located near the Wii console. Y'all may be experiencing radio frequency interference from other wireless devices.

i Jason Crowgey/Need Media

Remove the batteries from the Wii remote, if you are having an consequence with buttons sticking. Gently scrub effectually the Wii remote buttons using a clean toothbrush and warm tap water. Practise not get too much water on the remote. Wipe off the water with a clean paper towel. Let the remote air-dry confront downwardly before reinserting the batteries. Repeat this process until the buttons no longer stick.

Check to see if anything is blocking the sensor. Articulate objects away from the sensor and console to enable the remote to send a articulate point to the Wii organisation.

i Jason Crowgey/Demand Media

Center the sensor bar directly below or in a higher place your television. Having the sensor off-center may cause the Wii remote to perform poorly.

i Jason Crowgey/Demand Media

Bank check your remote's sensitivity. Identify the cursor on the Wii button located on the lower left corner of the screen. Select arrangement tools (the wrench). Select sensitivity (sensor bar). If two blinking lights appear on the screen, the remote sensitivity is prepare correctly.

i Jason Crowgey/Need Media

Adjust the sensitivity if the blinking dots are not nowadays. Use the plus (+) and minus (-) keys to adjust the sensitivity until two blinking lights appear on the screen. Apply the new sensitivity settings by selecting ostend.

i Jason Crowgey/Demand Media

Completely plow off the Wii arrangement. Remove the batteries from the remote. Turn the ability off on the Wii panel. Unplug the unit from the wall. Expect five seconds so replug the unit into the wall.

i Jason Crowgey/Demand Media

Push the power button to plough on the Wii console. After the health and safety screen appears, open the small door on the forepart of the Wii panel. Locate the red SYNC push button. Push down on the SYNC button for fifteen seconds. This resets all previous SYNCS on the Wii system.

i Jason Crowgey/Demand Media

Re-sync the Wii remote. Locate the red push on the remote command under the battery cover. Push and release this red button. The Wii remote should respond with blinking blue lights.

i Jason Crowgey/Demand Media

Push and release the red SYNC button on the Wii console. Identify the batteries back in the remote. When the remote is successfully re-synced, the LED calorie-free will remain lit.

Repeat the re-syncing process with all other Wii remotes on this system.

Tips

The higher the sensitivity settings are set on the system, the more sensitive it will exist to light sources such as fireplaces and sunlight. If y'all are having a trouble after adjusting the sensitivity, check to see if these lite sources are impacting the operation of the remote.

If the buttons on the Wii remote are not working, check the game instructions. Non all buttons are used in each game. If i button is non working, it may not be needed for the particular game y'all are playing.

If you have purchased a Wii remote separate from your Wii console, the remote will need to be synced to the Wii system earlier it will operate correctly.

Source: https://itstillworks.com/12199093/how-to-fix-a-nintendo-wii-controller

Share this post